3D Biofilm Models Containing Multiple Species for Antimicrobial Testing of Wound Dressings.

The treatment of chronic wounds presents a major challenge in medical care. In particular, the effective treatment of bacterial infections that occur in the form of biofilms is of crucial importance. To develop successful antibiofilm strategies for chronic wound treatment, biofilm models are needed that resemble the in vivo situation, are easy to handle, standardizable, and where results are readily transferable to the clinical situation. We established two 3D biofilm models to distinguish the effectiveness of wound dressings on important microorganisms present in chronic wounds. The first 3D biofilm model contains Staphylococcus aureus, Escherichia coli, and Acinetobacter baumannii, while the second is based on Pseudomonas aeruginosa. Bacteria are cultivated in a nutrient-rich agar/gelatin mix, into which air bubbles are incorporated. This results in a mature biofilm growing in clusters similar to its organization in chronic wounds. The models are convenient to use, have low variability and are easy to establish in the laboratory. Treatment with polihexanide and silver-containing wound dressings showed that the models are very well suited for antimicrobial testing and that they can detect differences in the efficacy of antimicrobial substances. Therefore, these models present valuable tools in the development of effective antibiofilm strategies in chronic wounds.

Critical parameters in cultivation of experimental biofilms using the example of Pseudomonas fluorescens.

Formation and treatment of biofilms present a great challenge for health care and industry. About 80% of human infections are associated with biofilms including biomaterial centered infections, like infections of prosthetic heart valves, central venous catheters, or urinary catheters. Additionally, biofilms can cause food and drinking water contamination. Biofilm research focusses on application of experimental biofilm models to study initial adherence processes, to optimize physico-chemical properties of medical materials for reducing interactions between materials and bacteria, and to investigate biofilm treatment under controlled conditions. Exploring new antimicrobial strategies plays a key role in a variety of scientific disciplines, like medical material research, anti-infectious research, plant engineering, or wastewater treatment. Although a variety of biofilm models exist, there is a lack of standardization for experimental protocols, and designing experimental setups remains a challenge. In this study, a number of experimental parameters critical for material research have been tested that influence formation and stability of an experimental biofilm using the non-pathogenic model strain of Pseudomonas fluorescens. These parameters include experimental time frame, nutrient supply, inoculum concentration, static and dynamic cultivation conditions, material properties, and sample treatment during staining for visualization of the biofilm. It was shown, that all tested parameters critically influence the experimental biofilm formation process. The results obtained in this study shall support material researchers in designing experimental biofilm setups.

The Short Lipopeptides (C10)2-KKKK-NH2 and (C12)2-KKKK-NH2 Protect HaCaT Keratinocytes from Bacterial Damage Caused by Staphylococcus aureus Infection in a Co-Culture Model.

The search for new antimicrobial strategies is of major importance since there is a growing resistance of both bacteria and fungi to existing antimicrobials. Lipopeptides are promising and potent antimicrobial compounds. For translation into clinically useful molecules, effectiveness of peptide treatment against human infections must be proved in complex in vitro wound models. The aim of this study was to examine if the synthesized short lipopeptides (C10)2-KKKK-NH2 and (C12)2-KKKK-NH2 can protect HaCaT keratinocytes from bacterial damage caused by Staphylococcus aureus infection in a coculture model. After 1 h, 24 h, and 48 h incubation, cellular ATP level and release of the cytotoxicity marker LDH as well as the proinflammatory cytokines interleukin-6 and interleukin-1α were measured. Infection of the keratinocytes resulted in strong bacterial damage of HaCaT cells along with low cellular ATP levels and high release of LDH, IL-6, and IL-1α after 24 h and 48 h. Incubation of the infected human keratinocytes with (C10)2-KKKK-NH2 and (C12)2-KKKK-NH2 resulted in protection of the keratinocytes from bacterial damage caused by Staphylococcus aureus infection with ATP, LDH, IL-6, and IL-1α levels comparable to the untreated control. Hence, both synthesized lipopeptides are promising candidates with high therapeutic potential in dermatology for the treatment of topical infections.

Evaluation of cell and hemocompatibility of Cucurbiturils.

BACKGROUND: Cucurbiturils (CB) are pumpkin-shaped macrocyclic molecules consisting of methylen-bridged glycoluril units. Because of their complexing characteristics, they can be used as drug containers for medical purposes. For future biomedical and dermal application of CB, the investigation of cell compatibility is essential. Little is known about the influence of CB on eukaryotic cells, especially on dermal keratinocytes. The structurally related cyclodextrins are known to induce cell death by apoptosis in HaCaT keratinocytes as well as hemolysis in erythrocytes. OBJECTIVE: To examine cytotoxic effects of different CB. METHODS: Different cytotoxicity tests were performed on HaCaT keratinocytes and erythrocytes incubated with CB[5], CB[6], and CB[7]. RESULTS: CB[5] and CB[6] did not lead to cytotoxic reactions at high concentrations up to 30 mg/mL whereas incubation with CB[7] triggered apoptosis at a concentration of 3.75 mg/mL. None of the investigated CB caused hemolytic effects on erythrocytes. CONCLUSION: These results confirm the high potential of CB as host-complexes for biomedical and dermal applications.

Three-dimensional human skin model infected with Staphylococcus aureus as a tool for evaluation of bioactivity and biocompatibility of antiseptics.

In the light of pandemic spreads of multi-drug-resistant micro-organisms, alternative antimicrobial strategies to the use of antibiotics are the focus of research attention. As a prerequisite for medical application, the aim of this study was to develop a three-dimensional full skin infection model to evaluate the bioactivity and biocompatibility of antiseptics in application-relevant concentrations. A three-dimensional (3D) full skin model consisting of collagen-embedded fibroblasts as dermis and a fully differentiated epidermis built from keratinocytes was infected with Staphylococcus aureus. Infected skin models were treated for 24 h with the antiseptics polihexanide, octenidine dihydrochloride, chlorhexidine digluconate and povidone-iodine. Infection resulted in detrimental effects, a strong immune response with increased secretion of lactate dehydrogenase and pro-inflammatory cytokines, and increased gene expression of pro-inflammatory cytokines and antimicrobial peptides after 24 h. Application of antiseptics protected the skin models from damage due to S. aureus infection while demonstrating good biocompatibility. The best ratio of bioactivity to biocompatibility was observed for polihexanide. Polihexanide also enhanced the innate immune response by increasing the gene expression levels of antimicrobial peptides such as human ß-defensin 2, human ß-defensin 3, psoriasin and ribonuclease 7. The developed model provides an excellent tool to investigate the response of human cells to microbial infections in a complex 3D structure. Furthermore, the infection model is appropriate for evaluation of bioactivity and biocompatibility of antiseptics. As such, the model presented in this study is a promising approach to evaluate the mechanisms and effectiveness of new antimicrobial strategies.

Cytocompatibility testing of cyclodextrin-functionalized antimicrobial textiles-a comprehensive approach.

Functionalized textiles can be used in wound management to reduce the microbial burden in the wound area, to prevent wound infections, and to avoid cross-contamination between patients. In the present study, a comprehensive in vitro approach to enable the assessment of antibacterial activity of functionalized textiles and cytotoxicity of cyclodextrin (CD)-complexes with chlorhexidine diacetate (CHX), iodine (IOD), and polihexanide (PHMB) is suggested to evaluate their properties for supporting optimal conditions for wound healing. For all ß-CD-antiseptic functionalized cotton samples a strong antibacterial effect on the Gram-positive bacteria Staphylococcus aureus and Staphylococcus epidermidis as well as on the Gram-negative bacteria Klebsiella pneumoniae and Escherichia coli was proven. In addition, ß-CD-CHX and ß-CD-PHMB were effective against the yeast Candida albicans. The growth of Pseudomonas aeruginosa could be reduced significantly by ß-CD-IOD and ß-CD-PHMB. The established comprehensive testing system for determination of biocompatibility on human HaCaT keratinocytes is suitable for obtaining robust data on cell viability, cytotoxicity and mode of cell death of the ß-CD-antiseptic-complexes. The promising results of the high antimicrobial activity of these functionalized textiles show the high potential of such materials in medical applications.

In vitro Evaluation of the Cleansing Effect of a Monofilament Fiber Debridement Pad Compared to Gauze Swabs.

BACKGROUND: Removal of nonvital tissue is an accepted method to eradicate biofilms and to stimulate wound healing. Debridement using a monofilament polyester fiber pad has clinically been shown to be effective as well as pain and trauma free. METHODS: For in vitro determination of the cleansing capacity of this product compared to gauze swabs, a wound debridement model was used with glass plates coated with a bovine serum albumin solution, stained with hematoxylin. Both products were moistened and fixed to a weight connected to a regulated motor and were then pulled over the holding device with the coated glass plate under standardized conditions (power = 0.067 N/cm2, velocity = 1.6 cm/s). RESULTS: At a low coating concentration (0.5%) both products were equally effective, but at a high concentration (1.5%) cleansing did not occur after 5 wipes. When wiping the plates 15 times, the debridement pad cleansed significantly (p < 0.001) better than gauze. When consecutively wiping 4 coated plates with a single debridement pad or swab, the pad exhibited and maintained a significantly higher cleansing capacity while gauze quickly lost its effect. CONCLUSION: Our in vitro test results indicated a higher cleansing capacity of the debridement pad compared to gauze swabs.

6-Deoxy-6-aminoethyleneamino cellulose: synthesis and study of hemocompatibility.

Hemocompatibility of aqueous solutions of antimicrobial 6-deoxy-6-aminoethyleneamino (AEA) cellulose with different degrees of substitution (DS, 0.54-0.92) was investigated in vitro. The AEA cellulose derivatives were synthesized by tosylation of cellulose and subsequent nucleophilic substitution with 1,2-diaminoethane. The structure was confirmed by elemental analysis as well as by FTIR and NMR spectroscopies. Markers for coagulation (thrombin generation, aPTT, PT, blood clotting, thrombocyte activation) and membrane integrity (hemolysis) were measured in human whole blood, human platelet-rich plasma, human pooled plasma, and erythrocytes suspension. AEA cellulose with a low DS of 0.54 showed the highest hemocompatibility in vitro, suggesting the possibility of biomedical applications.

Identification and significance of phenazone drugs and their metabolites in ground- and drinking water.

Residues of three phenazone-type pharmaceuticals have been identified in routine analyses of groundwater samples from selected areas in the north-western districts of Berlin, Germany. Phenazone, propiphenazone, and dimethylaminophenazone have been detected in some wells at concentrations up to the low microg/l-level. Additionally, three phenazone-type metabolites namely 1-acetyl-1-methyl-2-dimethyl-oxamoyl-2-phenylhydrazide (AMDOPH), 1-acetyl-1-methyl-2-phenylhydrazide, and dimethyloxalamide acid-(N'-methyl-N-phenyl)-hydrazide have also been identified in these groundwater samples. The residues are suspected to originate from former production spills of a pharmaceutical plant located in a city north of Berlin. It was observed that with the exception of AMDOPH all other residues were efficiently removed during conventional drinking water treatment. The drug metabolite AMDOPH deriving from dimethylaminophenazone residues was found at concentrations of 0.9 microg/l in finished drinking water. However, a following study on the toxicological relevance of the AMDOPH residues has shown that there is no toxicological harm for humans at the low concentrations of AMDOPH observed in Berlin drinking water.